LINAK

Linak BAJ BatteryThis battery is suitable for many of the leading mobile hoists. The battery can be detached from the hoist and quickly charged separately. The battery can serve as a replacement or spare to ensure maximum usability of the hoist. If you require assistance, please call 01772 814 555, our team is here to help. The Linak BAJ Battery for mobile hoistsThe battery pack BAJ has been specially developed for use with the JUMBO system. They are easy to exchange through an integrated snap system, and can easily be mounted on the mounting brackets.Features & Benefits• Functional and elegant design • High battery capacity: 24 V DC, 1 x 2.9 Ah This gives 40 lifts and lowering for the JUMBO system with fully charged battery under the following conditions: - Thrust up to: 6000 N - The actuator does not reach the end position at any time. - Stroke: S = 200 mm • By means of a snap system the battery pack can easily be mounted on the charger and/or the control box using LINAK mounting brackets • BAJ can be ordered with integrated DC plug • Protection class: Up to IPX5 (not defined for BAJ with integrated DC plug) • Colour: Bottom dark grey (RAL 7016) and top light grey (RAL 7035) • Possibility for customised front cover • Accessory: Battery cover BAJ is also available in a special edition that can be used in harsh conditions in the pool environment both outdoor and indoor. The pool lift version features and options differ from BAJ: • Improved contact terminals • Stainless steel screws • Robot injected sealing glue • Always external charger CHJ2 • Always IPX5Usage• BAJ is a part of the JUMBO system. It is compatible with CBJ1/CBJ2, CHJ2, CBJ Care and COBO • Duty cycle: 10% or 2 min. continuous use then 18 min. not in use • Ambient temperature: +5° to +40 °C • Storage temperature: -15° to +40° C • Relative humidity: 20% to 80% - non-condensing • Atmospheric pressure: 700 to 1060 hPa • Height above sea level: Max. 3000 meters • Flammability rating: UL94-V0 • Approvals: IEC60601-1, ANSI/AAMI ES60601, CAN/CSA-22.2 No 60601-1ChargingBAJ can be charged by • Charger CHJ2 • Control box CBJ1/2, CBJ Care, COBO• BAJ with integrated DC plug can also be charged by use of the external charger CH01..

Oxford Hoist ChargerThis Linak BAJ Battery Charger is suitable for the majority of UK mobile hoists. The Battery Charger includes a power lead. Be assured, all of our Spare Parts come with a 12 month warranty. If you require assistance, please call 01772 814 555, our team is here to help.Whats Included:ChargerPower LeadLinak BAJ Battery Charger introductionThe charger CHJ2 has been specially designed for use as a wall-charger for the JUMBO system. The CHJ2 charger is a Switch Mode Power Supply (SMPS) version which makes charging of the batteries more efficient. BAJ1 and BAJL (standard) battery pack have a reduced charging time. Mains voltage from 100 V AC - 240 V AC (50/60 Hz) is possible on same charger. The charger indicates whether the charger is connected to the mains (green LED) or whether the battery is being charged (yellow LED). Medically approved.Features• Functional and elegant design • Approx. charging time for BAJ1 / BAJL battery pack: 5 hours • The charger is of the SMPS type (Switch Mode Power Supply) • Mains voltage: 100 - 240 V / 50 - 60 Hz • Yellow light diode indicates whether the battery is charging • Green light diode indicates whether the charger is connected to the mains • Charging current up to 650 mA • Protection class: IPX5 (only when mounted vertically) • Colour: Bottom dark grey (RAL 7016) and top light grey (RAL 7035) • 3.2 m exchangeable mains cable (black straight)Options • 0.6 m coiled mains cable • Customised front cover • Cable hook for placing the mains cable • Bottom cover for use when mounted on the MBJ3 mounting bracketUsage: • Nominal current draw: Max. 400 mA • Power consumption (standby): Max. 2.5 W • Power consumption (charging): Max. 19 W • Ambient temperature: + 5 °C to + 40 °C • Storage temperature: - 10 °C to + 50 °C • Relative humidity: 20% to 80% - non-condensing • Atmospheric pressure: 700 to 1060 hPa • Height above sea level: Max. 3000 meters • Approvals: IEC60601-1, ANSI/AAMI ES60601 and CAN / CSA-22.2 No 60601-1..