Oxford Mermaid Electric Bath Hoist Standard Seat (End Fit)The Oxford Mermaid Bath Lift is designed to safely transfer patients in and out of the bath. The Mermaid bath lift ensures reliability with its robust design. The Mermaid Electric has an emergency stop/raise feature, providing extra safety for the user during lifts and transfers. To operate the Mermaids electric features, a handset is provided. Powered Raising/Lowering is controlled via the handset. The battery pack on the Electric Mermaid is also detachable.Mermaid SWL (Safe Working Load): 125 kg/20 st/276 lbsThis Electric Bath hoist fits at the End of your bath. This Mermaid includes a Standard Seat.SpecificationsSafe Working Load: 125 kg / 20 stMaximum Height to Base of Seat: 740 mmMinimum Height to Base of Seat: 140 mmMaximum Seat Travel: 485 mmMaximum Seat Width: 450 mmMaximum Width Between Arms: 395 mmMaximum Seat Depth: 410 mmCentre of Seat to Centre of Mast: 430 mmMaximum Seat Turning Radius: 850 mmMaximum Clearance from Mast (to allow for seat rotation): 1000 mmFeatures - Can be fixed to wooden or concrete floors- Hand Control for electronic functions- Includes a Velcro Lap Strap for extra security- Includes Battery- Includes ChargerBath Lift Installation: Wooden and concrete floor bolts are supplied with the mermaid for a choice of installation into two floor types. If you would like the Mermaid Bath Hoist to be installed (additional cost), please call the office on 01772 814 555, we would be happy to help! Please note, the additional cost of installation is subject to the bath hoists location and floor type. Whats includedMermaid Bath LiftPlastic (Standard) seatWooden and Concrete floor boltsHand ControlBatteryCharger..
Oxford Mermaid Seat BeltThis Seat Belt is for the Oxford Mermaid's Plastic Seat. Be assured, all of out Spare Parts come with a 12 Month Warranty. For more Oxford Mermaid Spare Parts, Click here. If you need assistance, please call 01772 814555, our team is here to help. About the Oxford Mermaid Bath LiftThe Oxford Mermaid is a bath hoist that helps patients transfer in and out of the bath. The Oxford Mermaid is available in both Electric and Manual versions. The Mermaid is also available in a wide range of configurations including Bath Side Positions (Side Fit, End Fit) and Seat Type (Standard Seat, Commode Seat, Ranger Seat) The Mermaid has a SWL (Safe Working Load) of 125kg and can be installed into either wood or concrete floors. The Electric Mermaid Version has a detachable battery pack and is controlled via a handset. ..
NRS SitnStand Portable Rising Seat - ClassicWhat the SitnStand Portable Rising Seat has to offer:Avoid letting sitting down and standing up prevent you from performing at your best! A revolutionary rising seat that supports your independence is the SitnStand.You may stand up from a seated position and sit down from a standing one without support because to the carefully constructed cushion. Ideal for persons with mobility issues or the elderly.The seat cushion can be inflated to make sitting more comfortable and to lessen the distance that must be bowed down. Once seated, you can progressively lower yourself into the seat by deflating the cushion. The cushion still offers unrivaled support and comfort even when deflated, even when used for extended periods of time. Simply inflate to stand up once more...
NRS SitnStand Portable Rising Seat - WheelchairA clever rising seat, portable lift chair called the SitnStand was created to enable seniors preserve their entire independence. This lift chair is hassle-free to use and ideal for elderly people living alone.Safe and simple: No assembly or installation.The medical seat lift assist, which may be connected to geriatric recliners, is ground-breaking. As you sit down and rise up, simple up/down buttons will steadily inflate and deflate the cushion.Most chair kinds are compatible with it, including armchairs, ordinary chairs, sofas, and even non-lifting recliners. The senior stand-up support gadget may relieve you of the need for additional assistance.Lifts adults weighing up to 120 kg thanks to its 4 inflatable chambers...
Ophthalmology Chair The chair has a low seat for patient mount and dismount and the hydraulic height adjustment enable the clinician to alter the position of the seated patient to the desired height before carrying out procedures and examinations. The arms provide maximum support for the patient as they mount and dismount from the chair. the fully adjustable can also be removed for certain procedures. Specifications The chair has a height range of 50cm to 64cm The backrest measures 49cm by 46cm The maximum safe working load if 150 kg Features Removable headrestArms provide maximum supportLow seat ..
Oxford Dipper Pool Hoist with Ranger Seat - Stainless SteelPlease be aware - This the new Oxford Dipper stainless steel and has replaced the older model. The new stainless steel Oxford Dipper now comes with a 10-year life span instead of 7 years. We expect the original oxford dipper to be replaced fully by the end of September.IntroductionStephen Pritchard, Managing Director of AAL LTD is a full-time wheelchair user and is driven to supply a quality service at an affordable price. The Oxford Dipper Pool hoist is the most predominant hoist within the UK’s NHS hospitals, Care Centres, Private Residential Homes, Yachting & Sailing Clubs, Quaysides, Therapy & Swimming Pools and Health Centres which has a maximum SWL (Safe Working Load) of 22 Stone (140 Kg).The Dipper uses a hydraulic pump to raise and lower service users and gives the support workers and service users peace of mind as it’s not reliant on electricity. To operate the hoist, simply pump the hydraulic pump using the handle to raise the user and to release, unscrew the black pump valve to slowly lower the service user.There are two variations of the Oxford Dipper Pool Hoist, the standard Oxford Dipper with spreader bar and the Oxford Dipper with Ranger seat. Both variations are available with an array of sockets to meet each individual customers specification.Oxford Dipper Pool Hoist with Ranger seatThe Ranger seat version is the most popular as it offers dignity to those service users who need extra assistance in a changing or bedroom before entering the pool. An example of this would be if a hotel had a pool with Oxford Dipper Pool hoist and a guest wished to use the pool, they could then get dressed in their room and then be pushed to the pool side and transferred into the pool safely and without fuss.The Oxford Dipper Ranger has been cleverly designed to aid users who need assistance approaching and entering the pool. The chair is reversed up to the Dipper pool hoist and the ‘T’ bar is connected to the back of Ranger chair. The support person simply pumps the dipper until it locks into position and continues to pump, raising the service user up further, enabling the seat to detach from the Ranger chassis and leave the service user sitting in the seat section. When lowered into position in the pool, the service user can then float away from the Ranger seat if desired.The process is carried out in reverse to lift the person from the pool, very easy, safe and convenient for both the user and support person whilst maintaining dignity.Can you have both options on one Dipper? There are two types of Oxford Dipper boom extensions, the 6 point spreader bar and the Ski tube which is compatible with the Oxford Ranger Seat. The 6 point spreader bar is used with slings, slings with loops, not clips. The spreader bar is very easy to attached, it takes 2 minutes. The Ski Tube connects again, very easy. This enables the Ranger seat to reverse up to lift, connect and lift with ease within a few minutes. To demonstrate how easy it is to connect these attachments, we've created a couple of short videos for your convenience.Specifications Safe Working Load (SWL): 140 kg / 22 stBoom Length: 1498 mmHeight (socket A & B, boom lowered): 1422 mm Height (socket A & B, boom full elevation): 2108 mm Base of Seat Above Floor Level (socket A & B): 889 mmBase of Seat Below Floor Level (socket A & B): 914 mmHeight (socket C, boom lowered): 1572 mmHeight (socket C, boom full elevation): 2258 mmBase of Seat Above Floor Level (socket C): 1039 mmBase of Seat Above Floor Level (socket C): 764 mmWeights: Weight - Mast Assembly: 15.4 kgWeight - Boom Assembly: 10.4 kgWeight - Chair Support Tube: 3.6 kgWeight - Ranger Seat: 4.5 kgWeight - Ranger Chassis: 8.7 kgWeight - Spreader Bar Assembly: 1.7 kgFeatures - 3 Floor Fixing Options- Use with almost any swimming pool- Safe Working Load (SWL) of 140 kg (22 st)- Spreader Bar and Sling option- Ranger Transporter optionHow do you connect the Oxford Dipper Spreader Bar?How do you connect the Oxford Dipper Ski Tube for the Ranger seat?How is the Dipper fitted to the floor? The Dipper comes with three options. Socket A, B and C. The sockets are ergonomically designed to be fit for different materials and finishes enabling the Oxford Dipper to be installed in almost any pool side setting. For more information on the socket fittings, please visit our website here.Socket A for Oxford DipperTo fit the socket A, a 1 m sq cube of concrete is required as the minimum recommendation. If already installed, a 91 mm hole then needs to be drilled 350 mm deep. An accredited engineer will then install the sockets interior, casing and socket cap which will then sit flush with the floor.The Dipper then slots into the socket when in use and once the use has been completed or you wish to store away, simply slide the dipper out of the hole ensuring you have lowered the boom to its lowest point and with the dipper strap, secure the pump tightly to the mast. This will prevent damage to the mast, pump and release valve when transporting the dipper to storage.After use please ensure the dipper pump is lowered to its lowest possible position, this ensures that the chrome on the hydraulic pump remains oiled and rust free and therefore extending the service life of the hoist. Should the hoist not remain oiled, the chrome will become pitted and this will destroy the internal seals over a long period of time, a new hydraulic pump costs approx. £500.00 exclusive of vat.Socket B for Oxford DipperSocket B is fitted and installed as shown in the picture above, socket B is primarily used in swimming pools which have a water channel around that outlines the perimeter of the pool. Socket B is a replica of socket A with an added base plate which adds additional bracing and support to the Oxford Dipper.The B socket plate is fixed into place with six 15 mm diameter expanding bolts of the rawplug type, for more information please see the socket construction as illustrated above.As with the A socket, the B socket is slightly below floor level and is fitted with a blanking plug. The blanking plug can be inserted into the hole when the Oxford Dipper is transported away for storage, this leaves a clean flush finish to the pool sides surface, minimising injury and maximising hygiene in the pool area. Socket C for Oxford DipperSocket C is surface mounted and stands proud of the floor by approx. 150 mm, this socket is used mainly where there is insufficient depth of concrete for sockets A or B. The C socket plate is drilled with four 15 mm rawplug type expanding bolts, the recommended minimum depth of concrete to enable an accredited engineer to install the hoist is 150 mm.Due to the protruding nature of the socket, socket C adds 150 mm to the overall height of the hoist and therefore alters the maximum height of the bottom of the chair to 1039 mm and the lowest position of the chair bottom below floor level to 764 mm. For more information, please see the illustration found above...
The SCCF1-3 is a specialized cushion for users who prefer a commode seat without a front opening. Here are the key features:Closed Front Design: The SCCF1-3 has a closed front, providing a seamless and comfortable surface.Comfortable Construction: Crafted from long-lasting foam, it offers softness and support.Easy to Clean: The vinyl overlay is machine-fitted, making it simple to maintain hygiene.Compatible Models: Specifically made for SB1, SB2, SB2T, and SB3T models.Simple Installation: To use, just lift off the existing cushion and push on the SCCF1-3.Remember to consult with your carer and occupational therapist (OT) to ensure that the SCCF1-3 accessory meets your specific commode needs..
Seat Cushion Overlay: Transforming Comfort and FunctionalityThe Seat Cushion Overlay is a versatile accessory designed for Showerbuddy chairs. Here’s why it’s a game-changer:Material: Crafted from durable PU foam.Commode Opening Cover: Conceals the commode opening in the regular seat.Dual Functionality: Instantly transforms your chair into a transport chair when the commode opening isn’t needed.Easy Press-Fit: Hassle-free installation.Easy to Clean: Ensures longevity and hygiene.Compatibility: Works seamlessly with other cushions in the Showerbuddy range (refer to the cushion matrix below for fit).Why Choose the Seat Cushion Overlay?Comfort: Enjoy greater comfort during transport.Discreet Design: Bathroom functions are covered discreetly.Versatility: Perfect for owners who want to take their chairs beyond the bathroom.Upgrade your Showerbuddy chair with the Seat Cushion Overlay and experience comfort wherever you go! ..
Sedens 410 Seat Cushion Alternating Cushion works with APEX alternating mattress system pumps and hybrid design with alternating therapy to relieve pressure.Specifications The mattress type is dynamic cushion Dimensions of the cushion 44 x 41 x 9cm The cell height is 3"Weight of cushion is 1.11 kg No maximum weight capacityFeatures Hybrid cells 24 hours pressure area care Non-slip base Removable top and base covers for easy cleaning 4 way stretch cover ..
Sedens 500 Seat Cushion The sedens 500 is a light weight and battery powered dynamic seat cushion perfectly designed to be used in wheel chairs .Specifications Pump: Dimensions: 24 x 12.5 x 5.7 cm Weight of cushion is 0.96 kg Case material is Flame Retardant ABS Supply voltage of DC 12V, 1.25A by adaptor Operating Cycle of 10/15/20 mins Cushion:The mattress type is dynamic cushion Dimensions of the cushion 43 x 43 x 10cm The cell height is 6cm Weight of cushion is 1.11 kg Maximum weight capacity of 120 kg Features Audible alarm Battery powered Pressure Redistribution A pump carry bag with adjustable strap can fit all sizes of wheelchair Foam support Non-slip base Removable top and base covers for easy cleaning Visual and audible alarm enhances patient safe..
The soft seat is designed for comfort and ergonomic support. It provides excellent pressure relief and a cozy experience. Specifically crafted for My-Loo toilet seat raisers, it can also be used with Hi-Loo and Cloo models...