Oxford Dipper Pool Hoist with Ranger Seat - Stainless SteelPlease be aware - This the new Oxford Dipper stainless steel and has replaced the older model. The new stainless steel Oxford Dipper now comes with a 10-year life span instead of 7 years. We expect the original oxford dipper to be replaced fully by the end of September.IntroductionStephen Pritchard, Managing Director of AAL LTD is a full-time wheelchair user and is driven to supply a quality service at an affordable price. The Oxford Dipper Pool hoist is the most predominant hoist within the UK’s NHS hospitals, Care Centres, Private Residential Homes, Yachting & Sailing Clubs, Quaysides, Therapy & Swimming Pools and Health Centres which has a maximum SWL (Safe Working Load) of 22 Stone (140 Kg).The Dipper uses a hydraulic pump to raise and lower service users and gives the support workers and service users peace of mind as it’s not reliant on electricity. To operate the hoist, simply pump the hydraulic pump using the handle to raise the user and to release, unscrew the black pump valve to slowly lower the service user.There are two variations of the Oxford Dipper Pool Hoist, the standard Oxford Dipper with spreader bar and the Oxford Dipper with Ranger seat. Both variations are available with an array of sockets to meet each individual customers specification.Oxford Dipper Pool Hoist with Ranger seatThe Ranger seat version is the most popular as it offers dignity to those service users who need extra assistance in a changing or bedroom before entering the pool. An example of this would be if a hotel had a pool with Oxford Dipper Pool hoist and a guest wished to use the pool, they could then get dressed in their room and then be pushed to the pool side and transferred into the pool safely and without fuss.The Oxford Dipper Ranger has been cleverly designed to aid users who need assistance approaching and entering the pool. The chair is reversed up to the Dipper pool hoist and the ‘T’ bar is connected to the back of Ranger chair. The support person simply pumps the dipper until it locks into position and continues to pump, raising the service user up further, enabling the seat to detach from the Ranger chassis and leave the service user sitting in the seat section. When lowered into position in the pool, the service user can then float away from the Ranger seat if desired.The process is carried out in reverse to lift the person from the pool, very easy, safe and convenient for both the user and support person whilst maintaining dignity.Can you have both options on one Dipper? There are two types of Oxford Dipper boom extensions, the 6 point spreader bar and the Ski tube which is compatible with the Oxford Ranger Seat. The 6 point spreader bar is used with slings, slings with loops, not clips. The spreader bar is very easy to attached, it takes 2 minutes. The Ski Tube connects again, very easy. This enables the Ranger seat to reverse up to lift, connect and lift with ease within a few minutes. To demonstrate how easy it is to connect these attachments, we've created a couple of short videos for your convenience.Specifications Safe Working Load (SWL): 140 kg / 22 stBoom Length: 1498 mmHeight (socket A & B, boom lowered): 1422 mm Height (socket A & B, boom full elevation): 2108 mm Base of Seat Above Floor Level (socket A & B): 889 mmBase of Seat Below Floor Level (socket A & B): 914 mmHeight (socket C, boom lowered): 1572 mmHeight (socket C, boom full elevation): 2258 mmBase of Seat Above Floor Level (socket C): 1039 mmBase of Seat Above Floor Level (socket C): 764 mmWeights: Weight - Mast Assembly: 15.4 kgWeight - Boom Assembly: 10.4 kgWeight - Chair Support Tube: 3.6 kgWeight - Ranger Seat: 4.5 kgWeight - Ranger Chassis: 8.7 kgWeight - Spreader Bar Assembly: 1.7 kgFeatures - 3 Floor Fixing Options- Use with almost any swimming pool- Safe Working Load (SWL) of 140 kg (22 st)- Spreader Bar and Sling option- Ranger Transporter optionHow do you connect the Oxford Dipper Spreader Bar?How do you connect the Oxford Dipper Ski Tube for the Ranger seat?How is the Dipper fitted to the floor? The Dipper comes with three options. Socket A, B and C. The sockets are ergonomically designed to be fit for different materials and finishes enabling the Oxford Dipper to be installed in almost any pool side setting. For more information on the socket fittings, please visit our website here.Socket A for Oxford DipperTo fit the socket A, a 1 m sq cube of concrete is required as the minimum recommendation. If already installed, a 91 mm hole then needs to be drilled 350 mm deep. An accredited engineer will then install the sockets interior, casing and socket cap which will then sit flush with the floor.The Dipper then slots into the socket when in use and once the use has been completed or you wish to store away, simply slide the dipper out of the hole ensuring you have lowered the boom to its lowest point and with the dipper strap, secure the pump tightly to the mast. This will prevent damage to the mast, pump and release valve when transporting the dipper to storage.After use please ensure the dipper pump is lowered to its lowest possible position, this ensures that the chrome on the hydraulic pump remains oiled and rust free and therefore extending the service life of the hoist. Should the hoist not remain oiled, the chrome will become pitted and this will destroy the internal seals over a long period of time, a new hydraulic pump costs approx. £500.00 exclusive of vat.Socket B for Oxford DipperSocket B is fitted and installed as shown in the picture above, socket B is primarily used in swimming pools which have a water channel around that outlines the perimeter of the pool. Socket B is a replica of socket A with an added base plate which adds additional bracing and support to the Oxford Dipper.The B socket plate is fixed into place with six 15 mm diameter expanding bolts of the rawplug type, for more information please see the socket construction as illustrated above.As with the A socket, the B socket is slightly below floor level and is fitted with a blanking plug. The blanking plug can be inserted into the hole when the Oxford Dipper is transported away for storage, this leaves a clean flush finish to the pool sides surface, minimising injury and maximising hygiene in the pool area. Socket C for Oxford DipperSocket C is surface mounted and stands proud of the floor by approx. 150 mm, this socket is used mainly where there is insufficient depth of concrete for sockets A or B. The C socket plate is drilled with four 15 mm rawplug type expanding bolts, the recommended minimum depth of concrete to enable an accredited engineer to install the hoist is 150 mm.Due to the protruding nature of the socket, socket C adds 150 mm to the overall height of the hoist and therefore alters the maximum height of the bottom of the chair to 1039 mm and the lowest position of the chair bottom below floor level to 764 mm. For more information, please see the illustration found above...
The Oxford Toileting Sling is a versatile and comfortable sling that allows easy toileting and dressing for patients. It comes in two styles: the Low Sling, which has a large opening for access to clothing, and the Plus Sling, which has a waist belt for extra security. Both styles are made from strong and soft polyester, and are padded for comfort. The sling can be used with any Oxford hoist, and has a simple loop attachment and a passive lift type. The sling is available in five sizes, and can safely lift up to 227 kgs (35.75 stone). The sling is also machine washable for convenience.FeaturesComfortable padding for the userRespectful and discreet toiletingEnables putting on and taking off clothesCompatible with any Oxford hoistSimple and fast to useCan be washed in a machine Specifications:Comes in 5 different sizesSling style: Low and PlusLift type: PassiveAttachment: Loops / 6-point spread barMaximum weight capacity: 227 kgs (35.75 stone)..
The Easy-Fit Sling is a comfortable and versatile sling that supports the whole body. It is made of soft and durable microfibre polyester that feels gentle on the skin. The Easy-Fit Sling has a split leg design that allows for easy fitting and removal. It also has the following features:Optional head support for extra comfort and stabilitySmooth nylon fabric on the leg sections to reduce friction and increase comfortRemovable leg and shoulder straps for easy cleaning and storageSize indicator on the top section for quick identificationDifferent coloured loops for safe and secure attachment to the hoistModesty loop to cover the patient’s lower body during transferCustomisable design to suit individual patient..
The Samsoft presents a compact and foldable mobile hoist, specifically engineered for effortless patient transfers between different positions. This hoist is characterized by its exceptional durability and versatility, operating entirely on electricity for both lifting and leg opening functions. Its comprehensive design addresses a wide spectrum of moving and handling requirements, ensuring seamless and comfortable patient transfers. This encompasses transfers to and from beds, chairs, as well as to the toilet or commode.The frame of the device is lightweight, allowing for effortless maneuvering into optimal positions for a wide range of transfer scenarios.Equipped with four 75mm high-quality castors that rotate 360 degrees, the rear castors feature brakes to ensure stability.Its compact design enables easy passage through standard doorways, enhancing accessibility.The push handles are ergonomically designed, offering various comfortable hand positions for the user's convenience.Featuring an electrically powered leg opening mechanism, this device ensures a stable and secure lift.The included handset is both ergonomic and user-friendly, promoting ease of use.Designed with practicality in mind, it can be folded without requiring tools or disassembly, and its vertical storage capability facilitates transportation and storage.The standard configuration includes a four-point spreader bar with secure hooks for attaching slings.With a low chassis height of 9.5cm, it can easily fit beneath most beds and furniture, providing enhanced flexibility for the user.The battery can be charged either while attached to the hoist or independently.For safety, the device is equipped with an emergency stop feature and a manual lowering function.Height: 55-174cm (Lifting)Width: 52-96.5cmProduct Weight: 38-7kg (inc spreader)Turning Radius: 142cmUnderbed Clearance: 9.5cmWeight Capacity: 175kg (27.5st)..
Oxford Dipper Pool Hoist with Spreader Bar - Stainless SteelPlease be aware - This the new Oxford Dipper stainless steel and has replaced the older model. The new stainless steel Oxford Dipper now comes with a 10-year life span instead of 7 years. We expect the original oxford dipper to be replaced fully by the end of September.IntroductionStephen Pritchard, Managing Director of AAL LTD is a full-time wheelchair user and is driven to supply a quality service at an affordable price. The Oxford Dipper Pool hoist is the most predominant hoist within the UK’s NHS hospitals, Care Centres, Private Residential Homes, Yachting & Sailing Clubs, Quaysides, Therapy &Swimming Pools and Health Centres which has a maximum SWL (Safe Working Load) of 22 Stone (140 kg).The Dipper uses a hydraulic pump to raise and lower service users and gives the support workers and service users peace of mind as it’s not reliant on electricity. To operate the hoist, simply pump the hydraulic pump using the handle to raise the user and to release, unscrew the black pump valve to slowly lower the service user.There are two variations of the Oxford Dipper Pool Hoist, the standard Oxford Dipper with spreader bar and the Oxford Dipper with Ranger seat. Both variations are available with an array of sockets to meet each individual customers specification.Oxford Dipper Pool hoist with Spreader BarThe spreader bar version is designed for service users who use a sling with loops to access the pool etc. The service user will access the pool via a wheelchair and wheel up to the spreader bar. The support person will fit the sling and once ready, raise the dipper by pumping the arm to a height that will enable the sling to be attached and thus raise the service user off the wheelchair. The user will then be suspended by the supporting sling, this person can then be safely lowered into the pool by unscrewing the black dipper release valve into the pool. Can you have both options on one Dipper? There are two types of Oxford Dipper boom extensions, the 6 point spreader bar and the Ski tube which is compatible with the Oxford Ranger Seat. The 6 point spreader bar is used with slings, slings with loops, not clips. The spreader bar is very easy to attached, it takes 2 minutes. The Ski Tube connects again, very easy. This enables the Ranger seat to reverse up to lift, connect and lift with ease within a few minutes. To demonstrate how easy it is to connect these attachments, we've created a couple of short videos for your convenience.Specifications Safe Working Load (SWL): 140 kg / 22 stBoom Length: 1498 mmHeight (socket A & B, boom lowered): 1422 mm Height (socket A & B, boom full elevation): 2108 mm Base of Seat Above Floor Level (socket A & B): 889 mmBase of Seat Below Floor Level (socket A & B): 914 mmHeight (socket C, boom lowered): 1572 mmHeight (socket C, boom full elevation): 2258 mmBase of Seat Above Floor Level (socket C): 1039 mmFeatures - 3 Floor Fixing Options- Use with almost any swimming pool- Safe Working Load (SWL) of 140 kg (22 st)- Spreader Bar and Sling option- Ranger Transporter optionHow do you connect the Oxford Dipper Spreader Bar?How do you connect the Oxford Dipper Ski Tube for the Ranger seat?How is the Dipper fitted to the floor? The Dipper comes with three (3) options. Socket A, B and C. The sockets are ergonomically designed to be fit for different materials and finishes enabling the Oxford Dipper to be installed in almost any pool side setting.Socket A for Oxford DipperTo fit the socket A, a 1 m sq cube of concrete is required as the minimum recommendation. If already installed, a 91 mm hole then needs to be drilled 350 mm deep. An accredited engineer will then install the sockets interior, casing and socket cap which will then sit flush with the floor.The Dipper then slots into the socket when in use and once the use has been completed or you wish to store away, simply slide the dipper out of the hole ensuring you have lowered the boom to its lowest point and with the dipper strap, secure the pump tightly to the mast. This will prevent damage to the mast, pump and release valve when transporting the dipper to storage.After use please ensure the dipper pump is lowered to its lowest possible position, this ensures that the chrome on the hydraulic pump remains oiled and rust free and therefore extending the service life of the hoist. Should the hoist not remain oiled, the chrome will become pitted and this will destroy the internal seals over a long period of time, a new hydraulic dipper pump costs approx. £500.00 exclusive of vat.Socket B for Oxford DipperSocket B is fitted and installed as shown in the picture above, socket B is primarily used in swimming pools which have a water channel around that outlines the perimeter of the pool. Socket B is a replica of socket A with an added base plate which adds additional bracing and support to the Oxford Dipper.The B socket plate is fixed into place with six 15 mm diameter expanding bolts of the rawplug type, for more information please see the socket construction as illustrated above.As with the A socket, the B socket is slightly below floor level and is fitted with a blanking plug. The blanking plug can be inserted into the hole when the Oxford Dipper is transported away for storage, this leaves a clean flush finish to the pool sides surface, minimising injury and maximising hygiene in the pool area. Socket C for Oxford DipperSocket C is surface mounted and stands proud of the floor by approx. 150 mm, this socket is used mainly where there is insufficient depth of concrete for sockets A or B. The C socket plate is drilled with four 15 mm rawplug type expanding bolts, the recommended minimum depth of concrete to enable an accredited engineer to install the hoist is 150 mm.Due to the protruding nature of the socket, socket C adds 150 mm to the overall height of the hoist and therefore alters the maximum height of the bottom of the chair to 1039 mm and the lowest position of the chair bottom below floor level to 764 mm. For more information, please see the illustration found above...
Oxford Mermaid Electric Bath Hoist with Ranger Seat (Side Fit)The Oxford Mermaid Bath Lift is designed to safely transfer patients in and out of the bath. The Mermaid bath lift ensures reliability with its robust design. The Mermaid Electric has an emergency stop/raise feature, providing extra safety for the user during lifts and transfers. To operate the Mermaids electric features, a handset is provided. Powered Raising/Lowering is controlled via the handset. The battery pack on the Electric Mermaid is also detachable.Mermaid SWL (Safe Working Load): 125 kg/20 st/276 lbsThis Electric Bath hoist fits at the Side of your bath. This Mermaid includes a Ranger Seat.SpecificationsSafe Working Load: 125 kg / 20 stMaximum Height to Base of Seat: 740 mmMinimum Height to Base of Seat: 140 mmMaximum Seat Travel: 485 mmMaximum Seat Width: 450 mmMaximum Width Between Arms: 395 mmMaximum Seat Depth: 410 mmCentre of Seat to Centre of Mast: 430 mmMaximim Seat Turning Radius: 850 mmMaximum Clearance from Mast (to allow for seat rotation): 1000 mmFeatures - Can be fixed to wooden or concrete floors- Hand Control for electronic functions- Lap strap to ensure patient safety- Safety Harness (Optional) for extra security- Includes Battery- Includes ChargerBath Lift Installation: Wooden and concrete floor bolts are supplied with the mermaid for a choice of installation into two floor types. If you would like the Mermaid Bath Hoist to be installed (additional cost), please call the office on 01772 814 555, we would be happy to help! Please note, the additional cost of installation is subject to the bath hoists location and floor type. Whats includedMermaid Bath LiftPlastic (Standard) seatWooden and Concrete floor boltsHand ControlBatteryChargerIf you are looking for Oxford Mermaid spare parts Click Here. We also supply a range of Seat Kits and Accessories...
Oxford Journey Smart Monitor Control Box (1 Channel Kit)This Smart Monitor Control Box (1 Channel) is for the Oxford Journey. Be assured, all of our Spare Parts come with a 12 Month Warranty. For more Oxford Journey Spare parts, Click here.About the Oxford JourneyThe Oxford Journey stand aid is ideal for safe manoeuvring and is designed to take the strain out of transportation. The folding design makes the hoist easy to store and transport whilst the unique adjustable cow horn function allows for ease of use. With the removable foot tray, the Journey transforms into rehabilitation aid allowing the patient to fully stand. The Smart TM monitor records data useful to the user and carer including total lift actuations (work completed), lift overloads (exceeding the SWL), identify service needed, increasing patient safety (by providing relevant/important data) and increasing the product service life. Standing and transport slings can be also applied to the Journey. ..
Marsden M-100 Column Scale with Height MeasureThe M-100 column scale from Marsden is a quality Class lll Approved scale with height measure. The Marsden M-100 has a 300 kg capacity and 50g accuracy. The easy to use functions and integrated height measure make it perfect for hospitals and GP surgeries. The excellent design means it can be positioned in the corner of the room to save space. The wide weighing area will make users more stable when standing on the scale.You can choose to have Bluetooth or WIFI connectivity to easily transfer the data.Key Features:Class lll Approved4 year warranty Integrated height measureUnique corner designLarge, robust baseNumeric keypad for easy BMI calculationAuto power off after 3 minutesHold functionsPerfect for hospital wards, outpatients and GP surgeriesSpecifications:300 kg capacityRechargeable battery pack460mm x 440mm x 1270mmUp to 55 hours of continuous useWeight - 16kg..
Folding Walking Frame With WheelsThe lightweight folding walking frame has two front wheels making the frame easier to manoeuvre whilst offering additional safety. The lightweight walking frame is ideal for both outdoor and indoor use. The Walking frame incorporates an excellent folding function for easy storage and transportation, this can be done without the need of any tools. The ergonomically designed walking frame from Drive also has the ability to be adjusted in height to suit the users specific needs.SpecificationsWidth: 64 cm (25")Depth: 46 cm (18”)Height (Min): 80 cm (32”)Height (Max): 98 cm (39”)Weight: 3 kg (7 lb)Safe Working Load: 180 kg (28 st)Features- Two front wheels make frame easy to manoeuvre- Non-slip, non-marking ferrules on rear legs offering additional stability- Suitable for indoor and outdoor use- Excellent folding mechanism- Easy push button mechanisms - Optional glide caps are provided- Each side operates independently to allow easy movement - Unique U-shape frame design creates greater clearance- The patient is able to bring the walker closer to assist in standing- Aluminium construction ensures maximum strength while remaining lightweight- Vinyl contoured hand grips for added comfort- Height adjustable to suit user requirements, between 80cm - 98cm (32” - 39”)- Lightweight frame weighs only 3kg (7lb)..
Molift Partner 255 With Scale The Molift Partner 255 is the ideal solution for high complexity hoisting situations within both hospitals and care facilities. The Partner 255 provides an excellent hoisting range of 37-179 cm (14.5" - 70.4") as well as hoisting from the floor and high surfaces. The With a straight vertical column in combination with fixed suspension, the Partner provides you with excellent stability. The Partner 255 has a total weight of 42.5 kg (94 lbs) making it one of the lightest hoists in it's category. The Molift Partner also comes with the Partner 4-point suspension bar (Large). The Partner 255 is equipped with the environmentally friendly NiMh-battery. SpecificationsMaterial: Aluminium, steel Length: 1285 mm (50.6")Hoisting Height: 390-1680 mm (15.4"-66.1")Hoisting Speed: 3 cm/sec (1.6"/sec) Hoisting Interval: 1290 mm (50.8")Width open legs inner: 1065 mm (41.9")Width chassis/legs outer: 690 mm (27.2")Leg Height: 115 mm (4.5")Total Weight: 42.5 kg (94 lbs)Rated Performance: 50 hoists at 75 kg and 50 cm (165 lbs and 19.7")Features- High safe working load of 255 kg- Weighing scale to weigh user when lifted- 4-Point spreader bar for extra comfort when lifting- Environmentally friendly battery and chargerWhats Included- 4-point suspension aluminum, Large-Battery and Charger included-Service Software Included-Hand Control-Scale Arm..