Product Overview
The Auto One Automatic Dynamic Mattress System is an advanced, cost-effective pressure care solution engineered for acute, residential, and home care environments. Combining automatic weight-based pressure adjustments with customizable manual controls, the Auto One delivers targeted pressure redistribution and immersion to prevent and treat pressure injuries across various care settings.
Designed to support high-risk pressure management, the Auto One features intelligent pump technology paired with a durable 'air-on-air' cell structure. The pump automatically determines the optimal surface pressure based on patient weight, eliminating guesswork for caregivers while allowing manual fine-tuning based on clinical assessment, BMI, posture, and patient comfort.
The mattress construction features 20 upper air cells operating on a 2-in-1 (AB) alternating pattern over customizable cycle times, supported by a continuous static air base that prevents bottoming out during power loss or repositioning. Encased in a fluid-proof, multi-stretch, 360-degree zipped cover with welded seams, the system prioritizes infection control, patient safety, and operational simplicity.
Key Features
Multiple Therapy Modes: Includes Alternating Mode (10/15/20/25-minute cycles), Constant Low Pressure (CLP) Mode for static immersion, Seat Mode to prevent sacral bottoming out when the backrest is elevated above 25 degrees, and Max Inflate Mode for rapid repositioning.
Automatic and Manual Pressure Adjustment: Automatically measures patient weight to set ideal pressure, with optional manual adjustments (+/-) to suit individual patient preferences and clinical needs.
Air-on-Air Cell Architecture: 20 upper cells (3 static head cells, 17 alternating cells) sit over 20 static base cells, ensuring continuous support and preventing bottoming out.
Emergency CPR Dial: Located at the foot end for rapid deflation during emergency procedures.
Infection Control and Durability: Features a 360-degree zip for easy cell access, welded seams to prevent fluid ingress, and multi-stretch, water-resistant, vapour-permeable covers.
Enhanced Safety Systems: Zipped full-length cable management reduces trip hazards, anti-kink spring hoses prevent air blockages, and an auto-lockout function prevents accidental panel changes after 5 minutes.
Audible and Visual Safety Alerts: Alerts caregivers immediately in the event of low pressure, alternate cycle failure, or power disruption (with a temporary mute function).
Easy Handling and Mounting: Equipped with 4 sturdy transport handles, bed securing straps with D-rings, and pump footboard hanging hooks with anti-vibration pads.
Fully Compliant: Tested and certified to EN60601-1, EN60601-1-2, and EN60601-1-11 medical standards.
Technical Specifications
Pump Cycle Times: 10, 15, 20, or 25 minutes (AB 2-in-1 alternating cycle)
Mattress Cell Layout: 20 Top Cells (3 Static Head, 17 Alternating) + 20 Static Base Air Cells
Cell Construction: Air-on-Air supportive base design
Inflation Times: Ready for patient loading at 30 minutes; fully set up at 40 minutes
Safety Standards: EN60601-1, EN60601-1-2, EN60601-1-11 compliant
Cover Features: Multi-stretch, water-resistant, vapour-permeable, 360-degree zip, welded seams
Air Hose Connectors: Quick connector with transport cap and anti-kink internal springs
